18
3 Assembly
1
Attaching camer
a head
· Do not touch the C-mount thread, since it is sharp.
· Be careful not to drop the camera head and the camera
adapter when attaching or detaching them.
} The pr
ocedures to attach the camera head when using the camera
adapter with C-mount U-TV1XC are described below.
Remove the C-mount lens cap
a
.
Screw the camera adapter with C-mount U-TV1XC
b
into the C-mount
thread
c
at the bottom of the camera head until it stops.
Attach the C-mount camera adapter to the camera port of the
microscope.
} If the camera is not attached in a correct direction, the direction of
the image observed through the eyepiece does not match with
the direction of the image through the camera. After the camera is
attached, compare the image observed through the eyepiece to the
live image acquired by the camera, and rotate the camera adapter
so that the directions of these images match each other.
To Next Page
Loading...
