13
11. Take out the CD-ROM.
12. Click on the <Start> button. When the [Start] menu is displayed,
click on [Control Panel].
13. When the [Control Panel] dialog box is displayed, click on
[Performance and Maintenance].
If the [Control Panel] display is of the classic type, doubleclick
on the [System] icon and go to step 15 below.
14. Click on [System].
15. When the [System Properties] dialog box is displayed, click
on the [Hardware] tab and then click on the <Device Man-
ager> button.
16. If the driver has been properly installed, “MalAd Device"
should be displayed as shown below. After confirming this,
click on the < > button.
Now the device driver installation is complete.
To Next Page
Loading...
