Olympus DS-2400 - Finalizing Partial File Erase; Confirming Partial Erasure Process

32
2
4
Press the ERASE button to confirm
erase.
The display changes to [Partial Erase!] and
erasing will start.
When [Erase Done] appears on the display,
partial erase is complete.
Notes
• If the ERASE button is not pressed within 8 seconds after the “Partial Erase Start”
and “Partial Erase End” are alternately displayed, the recorder will revert to stop
status.
• An erased file cannot be restored.
• Files cannot be Partial erased in the following cases.
- File being set [Lock] (☞ P.38).
- The SD card lock is turned on (☞ P. 8 ) .
Erasing
Erasing
134 / 134
DS2400
QP DICT
1 H 20 M 35 s
Partial Erase !
134 / 134
DS2400
QP DICT
1 H 20 M 35 s
Erase Done
PLAY/OK
4