Olympus DS-2400 - Formatting the SD Card; Initiating the Card Formatting Process

45
3
1
Select [Device Menu] at the [Format]
screen, then press the PLAY/OK or 9
button.
Refer to P.34 regarding the menu’s various setting
items.
2
Press the
+
or
–
button to select [Start]
option.
3
Press the PLAY/OK button to confirm
[Start] selection.
Format
Data will be
cleared
Formatting the Card
BACK
EXIT
Device Menu
Beep
12
Power Save
Time & Date
USB Class
Reset Settings
Format
BACK
EXIT
Format
Start
Cancel
PLAY/OK
PLAY/OK,
+, –, 9,
button
Cards that have been used in non-Olympus
devices, or cards that are not recognized by
the recorder, must be formatted before they
can be used with the recorder.
To familiarize yourself with the formatting
process, read the steps below.
The recorder’s menu settings cannot be
initialized. The initialization of menu items
should be set up through DSS Player or the
recorder’s [Reset Settings].
Formatting the Card (Format)