Olympus DS-2400 - Backlight (Backlight)

41
3
2
Press the + or
–
button to select [On]
or [Off].
On...Backlight is enabled.
Off...Backlight is disabled.
3
Press the PLAY/OK button to complete
the setup screen.
[On Set] or [Off Set] will light up on the display, and
it will return to the [Display Menu] screen.
If you press the 0 or F1
(
BACK
)
button the
setting will be cancelled and it will return to the
[Display Menu].
Pressing the F3(EXIT) button will cancel the
contents being set and take you out of the MENU.
4
Press the F3
(
EXIT
)
or 0 button to
complete the setting.
Backlight
Backlight (Backlight)
When the display backlight is set to [On], the
backlight will light up for about 10 seconds
when a button is pressed.
This is useful in that it allows you to check the
display even in dark locations.
1
Select [Backlight] at the [Display Menu]
screen, then press the PLAY/OK or 9
button.
Refer to P.33 regarding each menu item settings.
BACK EXIT
Display Menu
Backlight
12
Contrast
LED
Language
BACK EXIT
Backlight
On
Off
BACK
EXIT
Backlight
On
Off
On
Set
PLAY/OK
PLAY/OK,+, –,
9, 0
button
F1, F3 button