Olympus DS-2400 - System Sounds (Beep)

44
3
2
Press the + or
–
button to select [On]
or [Off].
On...System sounds are enabled.
Off...System sounds are disabled.
3
Press the PLAY/OK button to complete
the setup screen.
[On Set] or [Off Set] will light up on the display, and
it will return to the [Device Menu] screen.
If you press the 0 or F1
(
BACK
)
button the setting
will be cancelled and it will return to the [Device Menu].
Pressing the F3(EXIT) button will cancel the
contents being set and take you out of the MENU.
4
Press the F3
(
EXIT
)
or 0 button to
complete the setting.
System Sounds (Beep)
System Sounds
When this is set to [On], the recorder beeps to
alert you to button operations or warn you of
errors.
PLAY/OK
PLAY/OK,+, –,
9, 0
button
1
Select [Beep] at the [Device Menu]
screen, then press the PLAY/OK or 9
button.
Refer to P.33 regarding each menu item settings.
BACK EXIT
Device Menu
12
Format
Beep
Reset Settings
USB Class
Time & Date
Power Save
BACK EXIT
Beep
On
Off
BACK
EXIT
Beep
On
Off
On
Set
F1, F3 button