55
4
Connecting Recorder to PC
Notes
• NEVER remove the card or disconnect the USB cable while the record indicator light is flashing. If you do, the data on
the card will get destroyed.
• Some PC’s may not supply sufficient power and the recorder fails to connect. Refer to your PC User’s Manual regarding
the USB port on your PC.
• Do not connect the recorder to a PC by using a USB hub. Make sure to connect to a USB port on your PC.
• Make sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.
• This is an operational environment for saving the files recorded by this recorder to your PC with USB connection.
• Even if operational environment is satisfied, we do not support upgraded OS, the multi-boot environment or self-modified
computers.
Connecting Recorder to PC
To Next Page
Loading...
