Olympus E-PL2 - Restoring Default or Custom Settings; Saving MYSET; Using MYSET; Using Reset Settings

33 EN
Basic photography/frequently-used options
1
Restoring default or custom settings
Camera settings can be easily restored to one of three presets.
RESET ([RESET/MYSET] > [RESET])
Restore default settings.
MYSET ([RESET/MYSET] > [MYSET1] – [MYSET4])
Restore preselected settings for P, A, S, or M mode. The shooting mode does not
change. Up to four sets of preselected settings can be stored.
Quick MYSET
Preset settings are used only while the < button is pressed. Shooting mode is
adjusted to the preset settings.
Using reset settings
1 Select [RESET/MYSET] in shooting menu
W (P. 108).
2 Select [RESET] and press the Q button.
3 Select [YES] and press the Q button.
RESET/MYSET
BACK
SET
RESET
MYSET1
SET
MYSET2 SET
MYSET3 SET
MYSET4 SET
Using MYSET
1 Select [RESET/MYSET] in shooting menu
W (P. 108).
2 Select the desired settings ([MYSET1]–
[MYSET4]) and press
the Q button .
3 Select [SET] and press the Q button.
RESET/MYSET
BACK
SET
MYSET2 SET
MYSET1 SET
MYSET3 SET
MYSET4 SET
RESET
Saving MYSET
1 Adjust settings in order to save.
2 Select [RESET/MYSET] in shooting menu W (P. 108).
3 Select the desired destination ([MYSET1]–[MYSET4]) and press
I.
[SET] appears next to destinations ([MYSET1]–[MYSET4]) to which settings have
already been saved. Selecting [SET] again overwrites the registered setting.
To cancel the registration, select [RESET].
4 Select [SET] and press the Q button.
g “Settings stored using MYSET” (P. 106)
•
•