52
EN
Other shooting options
2
Panoramas
If you have installed the supplied computer software, you can use it to join
pictures together to form a panorama. g “Using OLYMPUS Viewer 2/[ib]”
(P. 70)
Taking pictures for a panorama
1
Rotate the mode dial to SCN.
2
Select [PANORAMA] and press Q.
3
Use FGHI to choose a pan direction.
250250 F5.6
3838
M
4
Take a picture, using the guides to frame
the shot.
Focus, exposure, and other settings are fi xed at the values for the fi rst shot.
5
Take the remaining images, framing each shot so that the guides
overlap with the previous picture.
[
2
]
[
3
]
EXITEXIT
250250 F5.6
3838
M
EXITEXIT
A panorama may include up to 10 images. A warning indicator (
g
) is displayed
after the tenth shot.
6
After taking the last shot, press Q to end the series.
# Caution
During panorama shooting, the image previously taken for position alignment will
not be displayed. With the frames or other markers for display in the images as a
guide, set the composition such that the edges of the overlapping images overlap
within the frames.
$ Notes
Pressing the Q button before shooting the fi rst frame returns to the scene mode
selection menu. Pressing the Q button in the midst of shooting ends the sequence
of panorama shooting, and allows you to continue with the next one.
•
•
•
•
To Next Page
Loading...
