Olympus E-PL2 User Manual

4 EN
Basic guide
Preparations for shooting
1 Loading the card.
Insert the SD/SDHC/SDXC
card (referred to as “card” in
these instructions) until it locks
in place.
g “Card basics” (P. 96)
# Caution
Turn off the camera before
loading or removing the card.
•
•
Removing the card
Press the inserted card lightly and it
will be ejected. Pull out the card.
# Caution
Do not remove the battery
or card while the card write
indicator (P. 22) is displayed.
•
2 Closing the battery/card compartment cover.
Close the cover until you hear
a click.
•
# Caution
Close the battery/card compartment cover when using the camera.•
Inserting and removing cards

Olympus E-PL2 Specifications

General

Sensor Type	Live MOS
Sensor Size	17.3 x 13.0 mm
Effective Pixels	12.3 megapixels
Image Processor	TruePic V
Screen Size	3.0 inches
Screen Resolution	460, 000 dots
Video Resolution	1280 x 720 (HD)
Storage Types	SD/SDHC/SDXC
Camera Type	Mirrorless
Image Stabilization	Sensor-shift
Continuous Shooting	3 fps
Lens Mount	Micro Four Thirds
Autofocus System	Contrast-detect AF
Battery Type	BLS-5
Shutter Speed	60 - 1/4000 sec