Olympus E-PL5 - Attaching the Fl Ash Unit

14 EN
Preparing the camera and fl ow of operations
1
Attaching the fl ash unit
1
Remove the terminal cover from the fl ash unit and attach the fl ash to the
camera.
• Slide the fl ash unit all the way in, stopping when it contacts the back of the shoe and
is securely in place.
2
1
UNLOCK switch
2
To use the fl ash, raise the fl ash head.
• Lower the fl ash head when the fl ash is not in use.
Removing the fl ash unit
Press the UNLOCK switch while removing the
fl ash unit.
2
1
UNLOCK switch