74
EN
Frequently-used options and customization
3
Option Description
g
Displayed Grid Display a framing grid in the monitor. —
Picture Mode
Settings
Display only the selected picture mode when a picture
mode is selected.
—
Histogram
Settings
[Highlight]: Choose the lower bound for the highlight display.
[Shadow]: Choose the upper bound for the shadow display.
85
Mode Guide Choose [Off] to not display help for the selected mode when
the mode dial is rotated to a new setting.
17
Live View Boost If [On] is selected, priority will be given to making images
clearly visible; the effects exposure compensation and other
settings will not be visible in the monitor.
—
Frame Rate Select [High] to reduce frame lag. However, the image
quality may drop.
—
Art LV Mode [mode1]: The fi lter effect is always displayed.
[mode2]: Filter effects are not visible in the monitor while
the shutter button is pressed halfway. Choose for a smooth
display.
—
Flicker reduction Reduce the effects of fl icker under some kinds of lighting,
including fl uorescent lamps. When fl icker is not reduced by
the [Auto] setting, set to [50Hz] or [60Hz] in accordance with
the commercial power frequency of the region where the
camera is used.
—
LV Close Up Mode [mode1]: Pressing the shutter button halfway cancels zoom.
[mode2]: Zoom is not cancelled when the shutter button is
pressed halfway.
36
q Close Up Mode [mode1]: Press U to zoom in (to a maximum of 14 ×) and
press G to zoom out.
[mode2]: Press U to display the zoom frame for the
specifi ed zoom ratio. Press U again to zoom in.
—
Backlit LCD If no operations are performed for the selected period, the
backlight will dim to save battery power. The backlight will
not dim if [Hold] is selected.
—
Sleep The camera will enter sleep (energy saving) mode if no
operations are performed for the selected period. The
camera can be reactivated by pressing the shutter button
halfway.
—
8 (Beep sound)
When set to [Off], you can turn off the beep sound that is
emitted when the focus locks by pressing the shutter button.
—
USB Mode Choose a mode for connecting the camera to a computer or
printer. Choose [Auto] to display USB mode options every
time the camera is connected.
—
U Disp/8/PC
MENU
c
U
To Next Page
Loading...
