Olympus E-PL7 - Connecting the Camera to a Computer and a Printer

108 EN
Connecting the camera to a computer and a printer
8
8
108 EN
Connecting the camera to a computer
and a printer
Installing OLYMPUS Viewer 3
OLYMPUS Viewer 3 is software for importing to your computer, and then viewing,
editing and managing the photographs and movies you have shot on your camera.
• You can also download OLYMPUS Viewer 3 from “http://support.olympus-imaging.com/
ov3download/”. You must enter the product’s serial number to download OLYMPUS
Viewer 3.
 Windows
1
Insert the supplied CD in a CD-ROM drive.
Windows XP
• A “Setup” dialog will be displayed.
• Microsoft has ended support for Windows XP. Use at
your own risk, as security problems may occur.
Windows Vista/Windows 7/Windows 8/Windows 8.1
• An Autorun dialog will be displayed. Click “OLYMPUS
Setup” to display the “Setup” dialog.
Cautions
• If the “Setup” dialog is not displayed, open CD-ROM (OLYMPUS Setup) in Windows
Explorer and double-click “LAUNCHER.EXE”.
• If a “User Account Control” dialog is displayed, click “Yes” or “Continue”.
2
Connect the camera to your computer.
Cautions
• If nothing is displayed on the camera screen even after connecting the camera to the
computer, the battery may be exhausted. Use a full-charged battery.
Multi-connector
Smaller terminal
USB cable
Look for this
mark.
USB port
Cautions
• When the camera is connected to another device via USB, a message will be
displayed prompting you to choose a connection type. Select [Storage].