15
EN
Preparing the camera and fl ow of operations
1
Power on
1
Press the ON/OFF button to turn on the camera.
• When the camera is turned on, the monitor will turn on.
• To turn off the camera, press the ON/OFF button again.
ON/OFF button
Battery level
; (green): Camera ready to shoot.
: (green): Low battery
] (blinks red): Charge the battery.
Monitor
250250 F5.6
01:02:0301:02:03
3838
ISO-A
200
Wi-Fi
Using the monitor
1 Press the monitor down.
2 Adjust the angle of the monitor according to the hinge axis.
2
1
1
2
1
1
Lower angle Self portraitUpper angle
For information on self portraits, read “Self-portraits” (P. 19).
Camera sleep operation
If no operations are performed for a minute, the camera enters “sleep” (stand-by) mode to
turn off the monitor and to cancel all actions. The camera activates again when you touch
any button (the shutter button, q button, etc.). The camera will turn off automatically if
left in sleep mode for 5 minutes. Turn the camera on again before use.
To Next Page
Loading...
