38
EN
Basic operations
4
Movie Tele-converter
1
Touch the icon to display the zoom frame.
• You can change the position of the zoom frame by touching the screen or using
FGHI.
• Press and hold Q to return the zoom frame to a central position.
2
Touch M or press the U button to zoom in on the area in the zoom frame.
• Touch N or press the U button to return to the zoom frame display.
3
Touch O or press Q to cancel the zoom frame and exit Movie tele-
converter mode.
Cautions
• The frame rate will drop slightly during recording.
• The 2 effects cannot be applied simultaneously.
• Use a memory card with an SD speed class of 6 or better. Movie recording may end
unexpectedly if a slower card is used.
• When mode1 has been set for taking photographs during movie recording (P. 21, 92), you
cannot take photographs while using movie effects.
• [e-Portrait] and [Diorama] cannot be used at the same time as Art Fade.
• The sound of touch operations and button operations may be recorded.
To Next Page
Loading...
