EasyManua.ls Logo

Olympus EVIS LUCERA CF H260AL/I - Returning the Endoscope for Repair

Olympus EVIS LUCERA CF H260AL/I
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
118
Chapter 5 Troubleshooting
EVIS LUCERA GIF/CF/PCF TYPE 260 Series OPERATION MANUAL
4. When using an EndoTherapy accessory, withdraw the EndoTherapy
accessory slowly while the tip of the EndoTherapy accessory is closed
and/or retracted into its sheath.
5. When using an endoscope with the flexibility adjustment function, set the
insertion section to the most flexible condition (for endoscopes with flexibility
adjustment only).
6. Aspirate accumulated air, blood, mucus or other debris by depressing the
suction valve.
7. Turn the UP/DOWN and RIGHT/LEFT angulation locks to the “F
direction to release them (the GIF-N260 has only the UP/DOWN angulation
lock).
8. Carefully withdraw the endoscope while observing the endoscopic image.
When a splinting tube is used, withdraw both the endoscope and the
splinting tube together from the patient’s anus (for CF/PCF models only).
9. Carefully withdraw the endoscope while observing the endoscopic image.
Remove the mouthpiece from the patient’s mouth (for GIF models only).
5.3 Returning the endoscope for repair
Thoroughly clean and high-level disinfect or sterilize the
endoscope before returning it for repair. Improperly
reprocessed equipment poses an infection control risk to
each person who handles the endoscope within the hospital
and at Olympus.
Before returning the endoscope for repair, contact Olympus. With the
endoscope, include a description of the malfunction or damage and the name
and telephone number of the individual at your location who is most familiar with
the problem. Also include a repair purchase order.
When returning the endoscope for repair, follow the instructions given in
“Transporting outside the hospital” on page 109.

Related product manuals