Chapter 2 Instrument Nomenclature and Specifications
39
EVIS LUCERA GIF/CF/PCF TYPE 260 Series OPERATION MANUAL
26. Chain connector (for GIF-N260, GIF-XP260 only)
This connector connects the fitting part of the chain for water-resistant cap
as required. Do not connect the S-cord of the electrosurgical unit to the
chain connector.
27. Passive bending section (for PCF-PQ260L/I only)
The passive bending section cannot be angulated by operating the
angulation control knobs, but it can be bent passively by pressing its
external surface.
To Next Page
Loading...