Olympus FL-600R - Button Functions; Flash Level and Zoom Adjustment

EN 13
Button Functions
Button Functions
Button Function Use
Adjust fl ash level by up to ±5 EV. This
value is combined with adjustments to
fl ash compensation made using the
camera.
1
Press (H) or ZOOM (G).
2
Rotate the dial.
ZOOM
Adjust the angle of illumination
manually. “M” appears in the display.
Manually turn the LED light on or off.
1
Before shooting, set the LED light to manual.
g “Other settings” (p. 17)
2
Press (I) to turn the LED light on. Press
(I) again to turn the LED light off. To view the
LED brightness setting, press and hold (I)
for 2 s while the LED light is on.
TEST
To fi re a test fl ash, press the TEST button while the CHARGE lamp is lit. The AUTO
CHECK lamp blinks for about 5 s to indicate that the fl ash has fi red successfully. If the
lamp does not blink, adjust settings or change the distance to the subject.
BACK
LIGHT
The control panel backlight lights for about 15 s. The backlight turns off when camera
controls are used.
bookR219110LEur.indb13bookR219110LEur.indb13 2012/01/1322:34:052012/01/1322:34:05