Olympus FL-600R - Custom Settings; AF Illuminator and LED Brightness; Slave Flash and Zoom Display

18 EN
Custom Settings
Custom Settings
Customize settings for improved ease of use.
1
Press the OK button for more than 2 s.
The fl ash will enter custom settings mode.
2
Press
FG
to highlight items.
3
Rotate the dial to change the highlighted item.
4
Press the OK button for more than 2 s to save changes.
Control panel Option Description
AF illuminator
A: Controlled by camera.
OFF: Does not light.
LED brightness 1/1–1/16: Adjust LED brightness.
Slave fl ash
ON: Flash control display shows slave mode.
OFF: Flash control display does not show slave
mode.
Flash cable
ON: Flash cable not used.
OFF: Flash cable used.
Zoom display
: Display values for FOUR THIRDS lenses.
OFF: Display 135 format equivalent values.
bookR219110LEur.indb18bookR219110LEur.indb18 2012/01/1322:34:062012/01/1322:34:06