EN 19
Control panel Option Description
Wide panel detection
ON: Flash detects position of wide panel. Angle
of illumination adjusted automatically.
OFF: Flash does not detect wide panel position.
Distance units
m: Distances displayed in meters.
ft: Distances displayed in feet.
Guide number
display
ON: Flash output is shown as a guide number.
OFF: Flash output is shown as a relative value.
Auto light sensing
ON: Show the fl ash range calculated by the
camera in AUTO fl ash control mode.
OFF: Show the current aperture and ISO
sensitivity.
Auto ISO display
25–3200: Display the ISO sensitivity when AUTO
is selected as the fl ash control mode for cameras
that can not communicate with the fl ash unit.
bookR219110LEur.indb19bookR219110LEur.indb19 2012/01/1322:34:072012/01/1322:34:07
To Next Page
