Olympus FL-700WR - Setting the firing angle (ZOOM); Setting the flash intensity (RATIO) in the X-RCV mode; Setting the communication group;channel in the RCV mode

55
EN
Setting the fi ring angle (ZOOM)
Press the ZOOM button to highlight ZOOM. Then, turn the dial to adjust the
setting.
• When you select A (auto), an automatic setting takes effect. The automatic
setting ranges from 12 mm to 75 mm.
• When the fl ash window is adjusted for bounce fl ash photography, you cannot
select A (auto).
• When you select M (manual), you can set a fi ring angle from 12 mm to 75 mm.
Press the OK button.
Setting the fl ash intensity (RATIO) in the X-RCV mode
Press the a button to highlight RATIO. Then, turn
the dial to select a setting.
• You can set a fl ash ratio from 1/1 to 1/128.*
1
MODE ZOOM
A
mm75
G/CH
M
A11
1/8
RATIO
1/4
1/8
1/16
Scale display*
2
*1 You can select 1/2 EV or 1/3 EV for the adjustment
increment. (P. 60)
*2 On the scale display, t is the current selection. u is the
previous setting.
Press the OK button.
Setting the communication group/channel in the RCV mode
• Select the same group and the same channel that
you set on the wireless commander/commander
fl ash.
Press the MODE button. Then, press HI on the
arrow pad to highlight GROUP (communication
group). Turn the dial to adjust the setting.
• You can select Group A, Group B, or Group C.
Press the OK button.
MODE ZOOM
A
mm75
GROUP
A
CH
1
G/CH
Press the MODE button. Then, press HI on the arrow pad to highlight CH
(communication channel). Turn the dial to adjust the setting.
• You can select a channel from 1 to 15.
Press the OK button.