Olympus Mju 1050 SW - Setting the Date and Time

13 EN
Setting the date and time
Thedateandtimesetherearesavedtoimage
lenames,dateprints,andotherdata.
1
Press the o button to turn on
the camera.
Thedateandtimesettingscreenisdisplayed
whenthedateandtimearenotset.
X
Y M
Y M D
D TIME
---- -- -- -- --
MENU
CANCEL
Dateandtimesettingscreen
2
Use 12 to select the year for [Y].
2008
-- -- -- --
X
Y M
Y M D
D TIME
MENU
CANCEL
3
Press the o button to save the
setting for [Y].
2008
-- -- -- --
X
Y M
Y M D
D TIME
MENU
CANCEL
●
4
As in steps 2 and 3, use 1234
and the o button to set
[M] (month), [D] (day), and
[TIME] (hours and minutes).
 Forprecisetimesetting,presstheobutton
asthetimesignalstrikes00seconds.
 Tochangethedateandtime,makethe
settingfromthemenu.[X] (Date/time)
(p. 45)
To check the date and time
Pressthegbuttonwhilethecamerais
turnedoff.Thecurrenttimeandalarmtime
aredisplayedforapprox.3seconds.
Changing the display language
Thelanguageforthemenuanderrormessages
displayedonthemonitorisselectable.
1
Set the mode dial to a position other
than R, 6.
2
Press the  button, and press
1234 to select [x SETUP].
S C N
RESET
PANORAMA
CAMERA
MENU
SILENT
MODE
MENU
EXIT SET
OK
IMAGE
QUALITY
SETUP