Olympus Mju 1050 SW - Using the Flash; Adjusting the Brightness (Exposure Compensation)

21 EN
2
Use 34 to select [ON], and press
the o button to set.
3
Point the camera toward the
subject. Check the frame appearing
around the face detected by the
camera, and then press the shutter
button to take the picture.
 Forsomesubjects,theframemaynot
appearormaytakesometimetoappear.
 Whensetto[ON],[ESP/n] (p. 30)is
automaticallyxedto[ESP],and[AF
MODE] (p. 31)isautomaticallyxedto
[FACEDETECT].
Using the ash
Theashfunctionscanbeselectedtobest
matchtheshootingconditionsandrenderthe
desiredimage.
1
Press the # button.
 Youcanoperatethecamerabytappingthe
bodywhen[TAPCONTROL]is[ON].
[TAP CONTROL] (p. 48)
P
OKOK
AUTO
SET
FLASH AUTO
AUTO
! # $
2
Use 34 to select the setting option,
and press the o button to set.
Item Description
FLASHAUTO
Theashresautomaticallyin
low-lightorbacklightconditions.
REDEYE
Thisemitspre-ashestoreduce
theoccurrenceofredeyeinyour
photos.
FILLIN
Theashresregardlessofthe
availablelight.
FLASHOFF Theashdoesnotre.
Adjusting the brightness
(Exposure compensation)
Thestandardbrightness(appropriateexposure)
canbeadjustedbrighterordarkertoobtainthe
desiredshot.
1
Press the F button.
0.0 +0.3
+0.7 +1.0
EXPOSURE COMP.
Exposurecompensationvalue
2
Use 1234 to select the desired
brightness image, and press the
o button.