Olympus Mju 1050 SW - Information Display

23 EN
Using the LED illuminator
Inadarklocation,theLEDilluminatorcan
beusedasanauxiliarylighttoseethingsor
composeshots.
1
Set [LED ILLUMINATOR] (p. 47) to
[ON].
2
Press and hold the Y button down
until the LED illuminator lights up.
IfyouperformanoperationwhentheLED
illuminatorison,itwillilluminateuptoapprox.90
seconds.
LEDilluminator
 TheLEDilluminatorturnsoffifnooperation
isperformedforapprox.30seconds.
 Evenwhenthecamera’spoweristurned
off,ifthelensbarrierisopened,theLED
illuminatorlightsfor30seconds.
To turn the LED illuminator off
PressandholdtheYbuttondown,untilthe
LEDilluminatorturnsoff.
●
Changing the shooting
information display
Thedisplayofthescreeninformationcanbe
changedtobestmatchthesituation,suchas
fortheneedofclearviewofthescreenorfor
makingaprecisecompositionbyusingthegrid
display.
1
Press the g button.
Thedisplayedshootinginformationchangesin
theordershownbeloweachtimethebuttonis
pressed.“Shooting mode display” (p. 8)
10 M
+2.0
P
4
IN
ISO
1600
N ORM
10 M
+2.0
P
4
IN
ISO
1600
N ORM
10 M
+2.0
P
4
IN
ISO
1600
N ORM
Normal
Noinformation
Histogram
Grid
Reading a histogram
Ifthepeakllstoomuchoftheframe,
theimagewillappearmostlywhite.
Ifthepeakllstoo
muchoftheframe,
theimagewill
appearmostlyblack.
Thegreensectionshows

theluminancedistributioninthe
centerareaofthemonitor.
●