Olympus Mju 1050 SW - Page 49

49 EN
Make the settings for the functions while referring to “Using the Menu” (p. 3).
Operating during playback mode
Whenswitchedtoplaybackmodebytappingthebackofthecamerabodyonce,theoperations
belowcanbeused.
Display next image:Taptherightsideofthecameraonce
Display previous image:Taptheleftsideofthecameraonce
Start slideshow:Tapthetopsurfaceofthecameratwice.(Theslideshowwillautomatically
startforallimagesstoredininternalmemoryoronthecard,with[BGM]setto[OFF].)
Display next image during a slideshow:Tiltthecamerarightortaptherightsideofthe
cameraonce.
Display previous image during a slideshow:Taptheleftsideofthecameraonce.
Stop slideshow:Tapthetopsurfaceofthecameratwice.
To adjust the tap control
1
Select[CALIBRATE]insubmenu2andpressthe
obutton.
TOP
SET
OK
MENU
BACK
STR INTVL
NORMAVG
2
Selecttheparttoadjustwith
12
andpressthe
obutton.
3
Selectthe[STR]settingwith
12
andpressthe
4
button.
4
Selectthe[INTVL]settingwith
12
andpressthe
obutton.
 Checktheoperationofthecamerabytappingonthecameraaftermaking
thesettings.
Turning off the camera sounds [j SILENT MODE]
jSILENTMODE
Submenu 1 Application
OFF Activatesthe[SOUNDSETTINGS]setting.
ON
Theelectronicsounds(operatingsound,shuttersound,warningsound)andplayback
soundsaremuted.
 [SOUND SETTINGS] (p. 43)