To select the memory page
Press the MEMORY PAGE button.
MEMORY PAGE button
Press the MEMORY PAGE button
repeatedly until the desired memory
page appears.
: / HIGHPRN SPEED
MOTION CHK
P
/c/ l /PRN/i/o/
RINTER SETUP
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
S
Selecting the method to be used to capture the images
You can select the method to be used to capture the images by using the PRINTER
SETUP menu and FUNCTION SETUP menu.
• Capturing only the image currently displayed on the video monitor screen or
capturing images sequentially to all reduced-image positions of a memory page
at regular intervals.
• Deciding which image displays on the video monitor screen after capturing an
image, a memory image or a source image.
1
Press the MENU button.
The previously selected menu appears.
2
Select PRN by pressing the G or g button.
The PRINTER SETUP menu appears.
When you select the type of reduced images to be captured, go to step 3.
When you select the type of full image to be captured, go to step 5
1,9
2,4,8
3,5,7
6
Switch PRN to green by pressing the
G or g button.
Display PRN in capital letters by
pressing the G or g button.
Continue to the next page c
To Next Page
Loading...
