CMOS color camera SC100
26
This is what the
SC100 looks like in
the Device Manager.
4) Check whether the Olympus Soft Imaging Solutions SC100 Camera entry is
diplayed.
An exclamation mark
highlighted in yellow
appears if the
installation went
wrong.
If this entry appears, proceed to the next problem description.
In case only the Other devices entry appears, the camera driver has not
been correctly installed. Follow the instructions in chapter 6.2.2 on
page 27.
With the MS-Windows XP operating system, a sub-entry USB Device
might appear below the USB Controller entry, indicated with an exclama-
tion mark that is highlighted in yellow. In this case, the camera has not
been correctly installed. Follow the instructions in chapter 6.2.4 on
page 30.
In case no suitable entry appears, unplug the USB cable and, after waiting
a little while, connect the USB cable with your PC again. Check whether
a new entry will appear below the USB controller entry. If this is not the
To Next Page
Loading...
Need help?
General
