6 Solving problems The camera can't be found
29
In case the correct camera driver is not displayed, it is not yet available on
your PC. In this case, follow the instructions in chapter 6.2.4 on page 30. .
The Windows Security dialog box will be opened.
5) In the dialog box, click the Install this driver software anyway entry.
A dialog box will open that confirms the installation of the camera driver.
6) Click the Close button.
7) Close the dialog box containing the driver's properties.
Now the correct camera driver appears in the Device Manager.
MS-Windows XP:
Load the camera
driver as decribed in
step 3 and 4 of the
installation
instructions.
1) Click the Update button.
The Found New Hardware Wizard dialog box will open.
2) Follow the steps 3 and 4 of the installation instructions decribed on page 17.
In case the correct camera driver is not displayed during the installation,
it is not yet available on your PC. In this case, follow the instructions in
chapter 6.2.4 on page 30.
To Next Page
Loading...