105
7
Settings
Changing the startup screen and shutdown
screen (PW ON SETUP/PW OFF SETUP)
You can select the picture displayed and the sound played when the
camera is turned on and turned off. You can also register your favorite
picture and display it on the screen. g“Screen setup” (P. 105)
Top menu [MODE MENU] [SETUP] [PW ON SETUP] /
[PW OFF SETUP] g“Using the menus” (P. 17)
1 For [SCREEN], select [OFF], [1],
or [2], and press Z.
OFF No picture is displayed.
1 A picture is displayed.
2 The picture registered with
[SCREEN SETUP] is displayed.
If there is no registered picture,
nothing is displayed.
2 For [SOUND], select [OFF], [1], or
[2], and press Z.
OFF No sound.
1/2 Sound is output.
• The volume level is the same as that set
with [VOLUME].
g“Setting camera sounds (8/BEEP/
SHUTTER SOUND/VOLUME)” (P. 107)
3 Press Z.
You can select the pictures that are displayed when the power is turned on and
turned off. Still pictures in the internal memory or the card can be registered. Use
[PW ON SETUP] or [PW OFF SETUP] to display the screen you registered.
g“Changing the startup screen and shutdown screen (PW ON SETUP/PW OFF
SETUP)” (P. 105)
Note
• If [SCREEN] is set to [OFF], [SOUND] cannot be set.
Screen setup
OK
SOUND
1
2
PW ON SETUP
SCREEN
OFF
SELECT
GO
OK
1
2
OFF
GO
PW ON SETUP
SOUND
SCREEN
SELECT
To Next Page
Loading...
