Focusing applications
55
4
Advanced shooting functions
The focus position can be locked. AF lock refers to locking the focus position. Be
sure to register the AF lock function to the [ button (custom button) before use.
g“Customizing the camera (MY MODE SETUP/SHORT CUT/CUSTOM
BUTTON)” (P. 113)
1 Position the AF target mark on
the desired subject and press the
[ button.
• The focus is locked, and the AF lock
mark is displayed.
• To reset the AF lock, press the [
button again. Press the [ button to
engage and disengage the AF lock.
2 Press the shutter button fully.
AF lock
TIPS
To save the locked focus position after
taking a picture (AF memory)
j Hold down the [ button for more
than 1 second to display the AF memory
mark. The focus is locked while the AF
memory mark is displayed. Press the
[ button again to cancel the AF
memory.
When the AF lock was canceled even
though it was engaged
j Do not operate any of the buttons or the
mode dial after performing the AF lock. Doing so will cancel the AF lock.
j When the camera reactivates after sleep mode, or the power or monitor is
turned off, the AF lock is canceled.
Note
• If the zoom is operated after engaging the AF lock, the picture may be out of
focus. Engage the AF lock after operating the zoom.
AF LOCK
441600
To Next Page
Loading...
