Olympus SP-500 - Histogram

Changing the monitor and viewfinder display (y)
71
5
Additional shooting functions
1 Press the DISP./GUIDE button repeatedly.
•Press the DISP./GUIDE button to change the display in the following order.
g“Direct buttons” (P. 12)
This displays the histogram. You can take pictures while checking the contrast of the
subject, thereby enabling you to closely control the exposure.
TIPS
• Information is displayed on the monitor when the display is changed or menu
operations are performed. For details about displayed information, refer to
“Monitor Symbols & icons” in the “Basic Manual”.
Histogram
OFF The histogram is not displayed.
ON The histogram is displayed.
DIRECT Displays the black and white areas directly on the picture.
When [DIRECT] is enabled, the histogram in playback mode is also
displayed directly on the picture.
44 1600
1600
×
1200
1200
SQ1
SQ1
0.0
0.0
F4.0
F4.0
1/200
1/200
Displays the regular shooting
information.
44
0.0
0.0
F4.0
F4.0
1/200
1/200
441600
1600
×
1200
1200
SQ1
SQ1
0.0
0.0
F4.0
F4.0
1/200
1/200
Displays only the AF target
mark.
Displays a histogram showing
the luminance distribution of the
picture.
This screen is not displayed in n
mode.
This screen is not displayed if
[u] is [OFF].
Displays lines. The lines
displayed will change depending
on the [FRAME ASSIST] setting.
This screen is not displayed in
n mode.
This screen is not displayed if
[FRAME ASSIST] is [OFF].