Adjusting the white balance
61
4
Advanced shooting functions
This function allows you to set the white balance compensation and make fine
changes to the currently set white balance.
Top menu [MODE MENU] [PICTURE] [>]
g“Using the menus” (P. 17)
1 Press sr to adjust the white
balance, and press Z.
• The color becomes more blue each
time you press s, and more red
each time you press
r.
• The white balance can be adjusted in
7 increments in both the [RED] and
[BLUE] directions.
Note
• White balance may not be effective under some special light sources.
• When taking pictures with the white balance on a setting other than [AUTO],
play back the picture and check the colors on the monitor.
• When the flash is fired with a white balance setting other than [AUTO], colors
may appear different in the resulting picture from the colors you see on the
monitor.
• When setting the white balance by pointing the camera at a sheet of white
paper, the correct setting may not be obtained if the light reflected by the paper
is too bright or too dark.
White balance compensation
OK
RED
To Next Page
Loading...
