Recording movies
46
3
Basic shooting functions
2 Press the shutter button fully to
start recording.
• The card access lamp blinks while the
movie is being saved.
• During movie recording, the A mark
lights red.
3 Press the shutter button again to
stop recording.
• When the remaining recording time has been used up, recording stops
automatically.
• When there is space in the internal memory or the card, the remaining
recording time (P. 28) is displayed, and the camera is ready to shoot.
TIPS
To record audio with the movie
j Set [R] to [ON]. g“Recording sound with movies” (P. 47)
To use the zoom during movie recording
j If you set [R] to [OFF], you can use the optical zoom during movie
recording. g“Recording sound with movies” (P. 47)
j Set [DIGITAL ZOOM] to [ON]. g“Using the digital zoom” (P. 39)
Note
• The remaining recording time may drop rapidly during recording. Try using the
internal memory or card again after formatting it with your camera.
g“Formatting the internal memory or card (MEMORY FORMAT/FORMAT)”
(P. 102)
•In n mode, the flash and manual focus are not available.
00:36
To Next Page
Loading...
