Menus
18
1
Basic operation
5 Press sr to select the [ISO],
and press q.
• Refer to the arrows on the screen to
select and make settings with the arrow
pad.
• Unavailable settings cannot be
selected.
6 Press sr to select [AUTO],
[80], [100], [200], or [400], and
press Z.
•Press Z repeatedly to exit the menu.
TIPS
• The operation guide displayed at the
bottom of the screen depends on the menu
to be set. In this case, follow the operation
guide to set or change settings using the
arrow pad.
1/2/3/4
ESP
DRIVE
ISO
AUTO
OFF
SET
PIC
CAMERAMEM
ESP
/
The selected item is displayed
in a different color.
Press q to go on to
the following setting.
AUTO
1/2/3/4
DRIVE
ISO
SET
PIC
CAMERAMEM
ESP
/
400
80
100
200
OK
2
1
GO
SELECT
LOW
HIGH
BEEP
OFF
In this manual, procedures for using the menus are expressed as follows:
• Ex: Steps 1 to 5 for setting [ISO]
Top menu [MODE MENU] [CAMERA] [ISO]
Menu operation notation
Operation guide
Press psr to select a setting.
Press Z to finalize the setting.
To Next Page
Loading...
