Olympus SP-590 UZ - Changing the Display Language

13 EN
4
As in steps 2 and 3, use 789:
and the o button to set [M]
(month), [D] (day), [TIME] (hours
and minutes) and [Y/M/D] (date
order).
 Forprecisetimesetting,presstheobutton
asthetimesignalstrikes00seconds.
 Tochangethedateandtime,makethe
settingfromthemenu.[X(Date/time)]
(p.54)
To check the date and time
Pressthegbuttonwhilethecamerais
turnedoff.Thecurrenttimeisdisplayedfor
approx.3seconds.
Changing the display language
Thelanguageforthemenuanderrormessages
displayedonthemonitor/viewnderisselectable.
1
Press the  button, and press
789: to select [E] (SETUP).
SETUP
MENU
EXIT SET
OK
2
Press the o button.
1
2
3
4
5
BACKUP
NORMAL
SETUP
ENGLISH
PW ON SETUP
MENU COLOR
MEMORY FORMAT
MENU
EXIT SET
OK
3
Use 78 to select [W] and
press the o button.
4
Use 789: to select your
language and press the o button.
5
Press the  button.