Olympus SP-590 UZ - Using OLYMPUS Master 2 Software; System Requirements and Installation; Connecting Camera to Computer; Starting OLYMPUS Master 2

64 EN
Using OLYMPUS Master 2
System requirements and
installation of OLYMPUS
Master 2
InstalltheOLYMPUSMaster2software
referringtotheincludedinstallationguide.
Connecting the camera to a
computer
1
Make sure the camera is turned off.
Themonitorisoff.
Thelensisretracted.
2
Connect the camera to a computer.
Thecameraautomaticallyturnson.
EASY PRINT
USB
SET
OK
EXIT
CUSTOM PRINT
PC
Opentheconnectorcover
inthedirectionofthearrow.
USBcable
(supplied)
Multi-connector
 LocatethepositionoftheUSBportby
referringtoyourcomputerinstructions
manual.
3
Use 78 to select [PC], and press
the o button.
Thecomputerautomaticallydetectsthecameraas
anewdeviceontherstconnection.
●
●
●
●
Windows
Afterthecomputerdetectsthecamera,a
messageindicatingthecompletionofthe
settingappears.Conrmthemessageand
click“OK”.Thecameraisrecognizedasa
removabledisk.
Macintosh
WheniPhotostarts,exitiPhotoandstart
OLYMPUSMaster2.
 Whilethecameraisconnectedtothe
computer,shootingfunctionsaredisabled.
 Connectingthecameratoacomputerviaa
USBhubmaycauseunstableoperation.
 When[MTP]issetforthesubmenuthat
appearsbypressing:afterselecting[PC]
instep3,imagescannotbetransferredtoa
computerusingOLYMPUSMaster2.
Starting OLYMPUS Master 2
1
Double-click the OLYMPUS Master 2
icon.
Windows
appearsonthedesktop.
Macintosh
appearsintheOLYMPUSMaster2folder.
Browsewindowappearsafterstartingthe
software.
 WhenyoustartOLYMPUSMaster2forthe
rsttimeafterinstallation,“DefaultSettings”
and“Registration”screenappear.Followthe
instructionsonthescreen.
●