Olympus SP-590 UZ - Page 51

51 EN 51
Adjust the settings for the functions while referring to “Using the Menu” (p. 3).
Setting the startup display screen and sound [PW ON SETUP]
ESETUPPWONSETUP
Submenu 2 Submenu 3 Application
SCREEN
OFF Noimageisdisplayed.
1 Apresetimage
*1
isdisplayed.
2
Astillimagestoredintheinternalmemoryorcardisregisteredfor
display.(Thisoptionleadstothesetupscreen.)
VOLUME
*2
OFF(Nosound)/
LOW/HIGH
Thevolumeofthestartupsoundisselected.
*1
 Thisimagecannotbechanged.
*2
 When[SCREEN]issetto[OFF],thissettingisnotavailable.
To register a startup image
1Select[2]insubmenu3for[SCREEN].
2Use
9:
toselecttheimagetoberegistered,andpresstheobutton.
Selecting the menu screen color [MENU COLOR]
ESETUPMENUCOLOR
Submenu 2 Application
NORMAL/COLOR1/
COLOR2/COLOR3
Selectsthemenuscreencoloraccordingtoyourpreference.
Selecting the camera sound and its volume [SOUND SETTINGS]
ESETUPSOUNDSETTINGS
 In[FSILENTMODE](p.57),allsoundscanbesettobeturnedoff.
Submenu 2 Submenu 3 Submenu 4 Application
BEEP
SOUNDTYPE
1/2
Selectstheoperatingsoundandvolumeofthe
camerabuttons(excepttheshutterbutton).
VOLUME
OFF(Nosound)/
LOW/HIGH
SHUTTERSOUND
SOUNDTYPE
1/2/3
Selectstheshuttersoundandvolume.
VOLUME
OFF(Nosound)/
LOW/HIGH
8
OFF(Nosound)/
LOW/HIGH
— Selectsthewarningsoundvolume.
qVOLUME
5levelsexcluding
OFF(Nosound)
— Adjuststheimageplaybackvolume.