Olympus SP-590 UZ - Page 53

53 EN 53
Adjust the settings for the functions while referring to “Using the Menu” (p. 3).
Resetting the file names of images
[FILE NAME]
ESETUPFILENAME
Month:1toC
(A=October,
B=November,
C=December)
Day:01to31
Pmdd
Foldername Foldername Filename
DCIM 100OLYMP
999OLYMP
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering
Automatic
numbering
Submenu 2 Application
RESET
Thisresetsthesequentialnumber
forthefoldernameandlename
wheneveranewcardisinserted.
*1

Thisisusefulwhengrouping
imagesonseparatecards.
AUTO
Evenwhenanewcardisinserted,
thiscontinuesthenumberingfor
thefoldernameandlenamefrom
thepreviouscard.Thisisusefulfor
managingallimagefoldernames
andlesnameswithsequential
numbers.
*1
 Thenumberforthefoldernameisresetto100,and
thenumberforthelenameisresetto0001.
Adjusting the CCD and image
processing function [PIXEL MAPPING]
ESETUPPIXELMAPPING
 Thisfunctionhasalreadybeenadjusted
atfactoryshipping,sonoadjustmentis
neededrightafterpurchase.Approximately
onceayearisrecommended.
 Forbestresults,waitatleast1minuteafter
takingorviewingpicturesbeforeperforming
pixelmapping.Ifthecameraisturned
offduringpixelmapping,repeatthepixel
mappingprocess.
Adjusting the CCD and image
processing function
1 Presstheobuttonwhen[START]
(submenu2)isdisplayed.
ThecamerachecksandadjuststheCCD
andtheimageprocessingfunctionatthe
sametime.
●