Olympus SP-590 UZ - Page 55

55 EN 55
Adjust the settings for the functions while referring to “Using the Menu” (p. 3).
Selecting a video signal system to match your TV [VIDEO OUT]
ESETUPVIDEOOUT
 TheTVvideosignalsystemvariesdependingonthecountriesandregions.Beforeviewingcamera
imagesonyourTV,selectthevideooutputaccordingtoyourTV’svideosignaltype.
Submenu 2 Application
NTSC ConnectingthecameratoaTVinNorthAmerica,Taiwan,Korea,Japan,etc.
PAL ConnectingthecameratoaTVinEuropeancountries,China,etc.
 Thefactorydefaultsettingsdifferaccordingtotheregionwherethecameraissold.
To play back camera images on a TV
1 ConnecttheTVandcamera.
ConnectionviaAVcable
ConnecttotheTVvideo
inputjack(yellow)and
audioinputjack(white).
Opentheconnector
coverinthedirectionof
thearrow.
AVcable(supplied)
Multi-connector
ConnectionviaHDMIcable
ConnecttotheHDMI
connectorontheTV.
HDMIminiconnector
HDMIcable(commerciallyavailable)
Opentheconnector
coverinthedirectionof
thearrow.
2 UsethecameratoselectthevideosignalformatthatmatchesthatoftheconnectedTV
([NTSC]/[PAL]).
3 TurnontheTV,andchange“INPUT”to“VIDEO(aninputjackconnectedtothecamera).”
●
●