Olympus SP-590 UZ - Assigning Functions to Button [CUSTOM BUTTON]

57 EN 57
Adjust the settings for the functions while referring to “Using the Menu” (p. 3).
Selecting the display units during manual focus [m/ft]
ESETUPm/ft
 “Changingthefocusmethod[FOCUSMODE]”(p.34)
Submenu 2 Application
m Thisdisplaysinmetersandcentimeters.
ft Thisdisplaysinfeetandinches.
Assigning functions to the z button [CUSTOM BUTTON]
ESETUPCUSTOMBUTTON
 “Usingafunctionassignedtothe
z
button(Custombutton)”(p.26)
Submenu 2 Application
AELOCK
*1
/AFLOCK
*2
/AFLOCK+AELOCK
*3
/
IMAGESIZE(p.29)/COMPRESSION(p.29)/
FINEZOOM(p.33)/DIGITALZOOM(p.33)/
AFMODE(p.34)/FOCUSMODE(p.34)/
FULLTIMEAF(p.35)/AFPREDICT(p.35)/
IMAGESTABILIZER(p.35)/
Q FLASH(p.36)/
R(p.37)/NOISEREDUCT.(p.38)
Theassignedfunctioniscalledandsetatthetouchof
abutton.
*1
Thisassignsthefunctionthatlockstheexposure.
*2
Thisassignsthefunctionthatlocksthefocusposition.
*3
Thisassignsthefunctionthatlockstheexposureandfocusposition.
Saving battery power between shots [SLEEP]
ESETUPSLEEP
Submenu 2 Application
1MIN/3MIN/
5MIN/10MIN
Whenthecameraisnotbeingused,themonitor/viewnderautomaticallyturnofftosave
batterypower(sleepmode).
Thisselectsandsetsthetimeuntilsleepmodeisactivated.
 Whenthecameraisnotbeingusedforapprox.12minutesinsleepmode,thecameraautomatically
turnsoff.
To cancel sleep mode
Presstheshutterbutton,arrowpadorturnthemodedial.
Turning off the camera sounds [F SILENT MODE]
FSILENTMODE
Submenu 1 Application
OFF Settingsareselectedindividuallyin[SOUNDSETTINGS](p.51).
ON
Startupsound,operatingsound,shuttersound,warningsoundandplaybacksoundare
muted.