Olympus SZX16 - Stage Adapter Type 1 SZH-STAD1 Installation

29
SZX16
9-5 Stage Adapter Type 1 SZH-STAD1
This adapter has the same function as the SZX-STAD1 BX stage adapter type 1, but the usable stages with this adapter
are the BH2-SH horizontal knob stage.
b
2
c
a
b
1
Use the tools shown in the table below.
Tool Description
Allen wrench (for M4 screw) Provided with SZH-STAD1
Hexagon socket screw (M4) Provided with SZH-STAD1
Placing the notch
a
on the front side of the base, secure the screws
(2 pcs.) using the Allen wrench to attach SZX-STAD1
b
to a base.
Place the stage clamping knob
c
of BH2-SH (horizontal knob stage)
on the front of the base, rotate the clamping knob
c
in clockwise
direction to secure it, and attach BH2-SH.
TIP
1
2
1
Assembly
STAD mount for ILLT SZX2-STADM is necessary for using the SZX2-ILLTQ/ILLTS LED transmitted light
illumination base. For details, refer to the instruction manual for the SZX2-ILLTQ/ILLTS LED.
TIP
Downloaded from ManualsNet.com search engine