Olympus SZX16 - Light Path Selection and Tilt Adjustment

12
Pull out the light path selector knob
a
to set the light path
for the right eyepiece to the camera light path. (The following
table shows the intensity ratio of each light path in %.)
Light Path Selector
Knob
Pushed-in Pulled-out
SZX2-TR30
SZX2-TTR
(
)
Right
Binocular 100%
Binocular 50%
Camera 50%
Left Binocular 50%
SZX2-TR30PT
SZX2-TTRPT
(
)
Right
Binocular 100%
Camera 100%
Camera 100%
Left Binocular 100%
Always push or pull the light path selector knob
a
all the
way into a stop position. Do not attempt to force the knob
past the stop position. Applying excessive force could
destroy the mechanism.
TIP
NOTE
Adjust the height and tilt of the observation tube to the most
comfortable viewing position.
Holding the binocular assembly with both hands, raise or
lower it to the desired position.
Do not attempt to force the binocular assembly past the
upper or lower stop position. Applying excessive force
could destroy the mechanism.
TIP
NOTE
5
Selecting the Light Path
6
Adjusting the Tilt
a
Downloaded from ManualsNet.com search engine