Connecting the camera Indicator lamp
TG-820 TG-620 TG-820 TG-620
I
Indicator lamp
On: Charging
Off: Charged
_' The battery is not fully charged at shipment. Before
use, be sure to charge the battery until the indicator
lamp turns off (up to 3 hours).
_lf the indicator lamp does eat light, the USB-AC
adapter is not connected to the camera correctly,
or the battery, camera, or USB-AC adapter may be
broken.
When to charge the batteries
Charge the battery when the error message shown below
appears.
Error message
Flashes in red