EasyManua.ls Logo

Olympus TG-620 - Appendix; Camera care; Battery and USB-AC adapter

Olympus TG-620
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Exterior
Wipe gently with a soft cloth. If the camerais verydirty,
soak the cloth in mild soapy water and wring well. Wipe
the camera with the damp cloth and then dry it with a
dry cloth. If you have used the camera at the beach,
use a cloth soaked in clean water and wrung well.
If any dirt, dust, sand, or other foreign materials adhere
to the camera after use, wash the camera using the
method described on p. 69.
Monitor
Wipe gently with a soft cloth.
Lens
Blow dust off the lens with a commercial blower, then
wipe gently with a lens cleaner.
_ Do not use strong solvents such as benzene or
alcohol, or chemically treated cloth.
_ Mold may form on the lens surface if the lens is left
dirty.
Battery/USB-AC adapter
Wipe gently with a soft, dry cloth.
StQrage .............................................................................................................................................................
When storing the camera for extended periods, remove
the battery, USB-AC adapter and card, and keep in a
cool, dry place that is well ventilated.
Periodically insert the battery and test the camera
functions.
_ Avoid leaving the camera in places where chemical
products are handled since this may result in
corrosion.
This camera uses one Olympus lithium ion battery
(LI-50B). No other type of batteries can be used.
_ Caution:
There is a risk of explosion if the battery is replaced
with the incorrect battery type.
Dispose of the used battery following the instructions.
(p. 72)
Power consumption by the camera varies depending on
which functions are used.
During the conditions described below, power is
consumed continuously and the battery becomes
exhausted quickly.
The zoom is used repeatedly.
The shutter button is pressed halfway repeatedly in
shooting mode, activating the auto focus.
A picture is displayed on the monitor for an extended
period of time.
The camera is connected to a printer.
Using an exhausted battery may cause the camera to
turn off without displaying the battery level warning.
The included USB-AC adapter F-2AC is designed to be
used only with this camera. Other cameras cannot be
charged with this USB-AC adapter.
Do not connect the included USB-AC adapter F-2AC to
equipment other than this camera.
For plug-in type USB-AC adapter:
The included USB-AC adapter F-2AC is intended to be
correctly orientated in a vertical or floor mount position.
EN

Table of Contents

Related product manuals