Selecting a method for connecting
the camera to other devices
[USB Connection]
......._ (_etti B Connection ................................
When the camera is connected to
Auto another device, the settings selection
screen is displayed.
Select wh........ ting th.......
to a computer via a storage device.
Select when transferring images
MTP without using the supplied [ib] (PC
software) on Windows Vista/
Windows 7.
Print Select when connecting to a
PictB ridge-compatible printer.
®
®
System requirements
Windows : Windows XP Home Edition/
Professional (SP1 or later)/
Vista/Windows 7
Macintosh : Mac OS X v10.3 or later
When using another system other than Windows XP
(SP2 or later)NVindows Vista/Windows 7, set to
[Storage].
Even if a computer has USB ports, proper operation
is not guaranteed in the following cases:
• Computers with USB ports installed using an
expansion card, etc.
• Computers without a factory-installed OS and
home-built computers
Turning on the camera with the
button [[_ Power On]
IThe camera is not turned on. To turn
No on the camera, press the ON/OFF
button.
Press and hold the [] button to turn
the camera on in the playback mode.
Saving the mode when the camera is
turned off [Keep_Settings]
The shooting mode is saved when
Ye the camera is turned off and is
.......... reactivated the next time the camera
is turned on.
No The shooting mode is set to P mode
when the camera is turned on.
EN
To Next Page
Loading...
