1
BEFORE USE
This unit employs the UIS2/UIS optical system and should be used only with UIS2/UIS microscopes,
eyepieces and objectives. Less than optimum performance may result if inappropriate accessories
are used.
Caution:
If the condenser is used in a manner not specified by this manual, the safety of the unit may be impaired.
In addition, the unit may also be damaged. Always use the unit as outlined in this instruction manual.
FEATURES
1. 3 kinds of the light annuli are built into this turret condenser, allowing the following observations by
changing the light annuli.
Phase contrast observation: 10X, 20X, 40X, 100X
Darkfield observation: 10X or higher
Brightfield observation
2. This phase contrast condenser makes it possible to center each light annuli.
3. Applicable phase contrast objectives are as follows:
UIS2 series UPlanFLN 10Xph, 20Xph, 40Xph, 100XOph
PlanN 10Xph, 20Xph, 40Xph, 100XOph
UIS series UPlanFl 10Xph, 20Xph, 40Xph, 100XOph
Ach 10Xph, 20Xph, 40Xph, 100XOph
Plan 10Xph, 20Xph, 40Xph, 100XOph
To Next Page
Loading...
