Olympus VANOX-T - Page 30

g
OPERATING
THE
MICROSCOPE
|
Film loading
a) Fuji instant camera back
© Picturesize: | 97X 102mm
© Film used: Fuji instant color film FI-10 (ISO/ASA 160)
‘© Insert the batteries,
1) Insert four 1.5V alkaline-manganese batteries size AA into the:
battery chamber. Follow the directions given inside the chamber
for battery polarity.
2) Other manganese or Ni-Cd batteries of the same rating can be
used,
= Load the film,
1) Open the film case and take out the film pack.
2) Push the cover release button (D in the direction of the arrow
mark engraved on the cover, and open the cover. (Fig. 37)
3) Aligning the orange line of the pack to that of the back, push
the pack into the camera until it snaps into place.
4) As you press the release button of the back, the light excluding
slide of the pack will be automatically advanced,
The camera back is now ready for taking pictures
b) Polaroid camera back“
© Picturesize: 34" X 44" (73 X 96 mm)
« Film used: Polaroid type 668 (color, ISO/ASA75)
Polaroid type 667 (BAW, ISO/ASA3000)
= Load the film
“Read the instructions inserted in the film pack first and then take
the
following steps:
1) Open the film box and take out the film pack
2) Push the cover locking latch (D upwards with both hands. (Fig.
38)
3) Open the camera back cover all the way.
* Handle with care so as not to break the cover.
FG ia essential to keep tho rollors Caan, for airy roller wil}
{produce irregularities on the picture.
À 1 To clan the roller, lit the roller unit
É (Fig 39)
$
}
2
upwards and remove.
2) Wipe the rollers first with a wet cloth and then with a dry cloth
3) After cleaning, place the roller unit in its original position,
*
Do
not
scratch
the
roller
surface
with
finger
nails
or
sharp
metallic objects
+ Polaroid is the rog
Mess, USA,
red trademark of Polaroid Corporation, Cambridge.