Need help?Do you have a question about the Olympus SLIDEVIEW VS200 and is the answer not in the manual?
General| Light Source | LED |
|---|---|
| Scanning Method | Line scanning |
| Z-stack acquisition | Yes |
| Scanning Speed | Approx. 60 seconds per slide (20x) |
| Connectivity | Ethernet |
| Software | Olympus scan software |
| Image Format | TIFF, JPEG |
Details safety instruction categories and keywords like CAUTION and ATTENTION.
Provides essential safety guidelines for system operation and environment.
Safety precautions related to the laser sensor in the loader.
Instructions for unboxing the VS200 scanner unit.
Guidance on removing transportation locks from the VS200 scanner.
Unboxing instructions for the VS200 loader.
How to remove transportation locks from the VS200 loader.
Instructions for mounting components onto the VS200 scanner.
Guidance on mounting objectives onto the scanner's nosepiece.
Information on installing and configuring Phase Contrast objectives.
Steps for assembling the IX3-RFACA and IX3-RFALFE fluorescence units.
Critical guidance on correctly orienting monochrome cameras.
Lists five predefined configurations for VS200 kits.
Steps to enable the motorized polarizer functionality in the software.
How to activate the VS200 liquid dispenser in the device list.
Instructions for configuring objective settings in the software.
Guide to configuring new fluorescence filters in the VS200 ASW software.
How to customize observation methods and camera settings.
Adjusting settings for ORCA cameras within observation methods.
Steps to create and configure a Phase Contrast observation method.
Guide to setting up a polarization observation method.
How to create or modify observation methods for image acquisition.
Basic steps to insert a slide into a tray.
Procedure for inserting a tray into the VS200 scanner.
Steps to insert a tray into the VS200 loader.
Calibrating the Z-axis stage limits based on slide thickness.
To Next Page
