18 VS200 device configuration
3. Type in the name of the filter in the [Filter] field.
Example of filter configurations for U-FFWR and U-FFWO in the
[Device Settings] dialog box.
4. Add additional filters if required by selecting the appropriate position and
selecting the name of the filter.
5. Click the [OK] button to save the changes.
6. Subsequently you have to configure an observation method in the [Device
Customization] dialog box to be able to use the new filter. See Create or
adjust an observation method auf Seite 95.
18.5 Manual device configuration
This chapter describes the manual configuration of VS200 hardware devices.
- 89 -
Instructions for useOLYMPUS VS200 System
To Next Page
Loading...
