Olympus VS120 - User Manual

User’s Manual
[Simple Operation]
VS120
Virtual Slide System
Notice
This manual describes simple operating procedures so as the person who uses it for the
first time can use with use.
For detail information, refer to [Hardware] of the attached Instructions and [Online Manual]
of software
After reading this manual carefully, keep it in a safe place.
A X 8 0 3 6

Olympus VS120 Specifications

General

Brand	Olympus
Model	VS120
Category	Microscope
Language	English

Summary

Acquiring Images

VS120-L100 Image Acquisition

Describes how to acquire images using the VS120-L100 with automatic transport function.

VS120-S5 Image Acquisition

Details image acquisition procedures for the VS120-S5 model using automatic transport.

VS120-S1 Image Acquisition

Explains how to acquire single slide glass images using the VS120-S1 system.

Setting Focus Logic for Image Acquisition

Guide on setting the focus adjustment method for each slide glass during image acquisition.

Managing Acquired Image Save Locations

Instructions on how to set the save location for acquired images to disk or database.

Databases

Opening and Accessing Databases

Steps to open and connect to a database, including entering user credentials.

Registering Images in the Database

Procedures for registering image files from a hard drive or after viewing into the database.

Setting Database Image Permissions

Guide on changing access rights for images within the database using record permissions.

Viewing Images in the Database

Instructions on how to locate and view saved image files within the database system.

Using Scan Projects

Saving Scan Project Settings

Steps to save scan area and detailed image acquisition settings as a project.

Loading and Using Scan Projects

How to load a saved scan project to start scanning with pre-configured settings.